Looking help for How to Connect Brother Printer to Wifi Wireless Network? It is required to Connect Brother Printer to WiFi because without internet connection, you can’t install the printer driver. Read this Article and get How to establish a connection between your printer to the wireless network. While using a device you may come across brother hl-l2340dw wifi setup and other various problems, it’ absolutely fine. Everything will be taken care of by my team. Don’t need to worry we will help you with this. Brother printer support have experts

Things to Remember Before Connect Brother Printer to Wifi

Before Start the Solution to connect brother printer to wifi we must know what type of problem occurs due to the fact that we are not able How to connect brother printer to wifi.

You should have some data about your network before setting up the wireless settings. 

1- Name of the network (SSID). 

2- A password of the network (safety key). 

And you can check this information on the back of your router.

Here are some steps to configure the Brother Printer Machine wireless setup.

Step 1: On your brother printer tp configuration, you must use the control panel wirelessly.

Step 2: Connect your printer to the AC power cord first and switch the printer on.

Step 3: MENU Press.

Step 4: To select network setup / wireless configuration, press up or down arrow key.

Step 5: Press up or down arrow key to select the network and click ok.

Step 6: Press up or down arrow key to select WLAN and click ok.

Step 7: Press up or down arrow key to select the installation assistant and click ok.

Step 8: Activate… The wireless network appears to be enabled.

The wireless configuration wizard will be started.

The printer will search for your network and show a list of accessible networks using the arrow key to select the SSID you want and click ok. Then type the key to the SSID (safety key).

Few ways to Connect Brother Printer to the WiFi ?

Configure wireless settings:

• Connect to the Brother device the AC energy cord.
• Connect to the outlet of the AC energy. Turn on the machine of your brother.
• Do not have a USB cable connected yet.
• Turn the PC on.
• Place the CD-ROM provided on the CD-ROM drive.

Before setting the wireless settings:

• You should understand the WLAN access point / router’s wireless network settings.

1.Configuring machine for a smaller wireless network, such as home setting, for a private wireless network configuration.
2.Check the present wireless network settings below and record them.

• Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID)

• Network Key (Password, Security Key, Encryption Key, etc.)

• Brother promotes only the use of the first WEP KEY.

3. If you are using a router that uses more than one WEP KEY, enter the KEY that was used for the first WEP KEY. How to discover Network Name (SSID, ESSID) and Network Key

1. Check your access point / router’s side.
Point / router of WLAN access 1. Check the WLAN access point / router paperwork.
2. The name of the initial network might be the name of the manufacturer or the name of the model.

For users of Macintosh:

1. Use the Setup Wizard to manually configure the Brother machine from the control panel of the machine.
2. Check out more information on the control panel configuration.

How to set up a Wireless machine (printer).

Remember the automatic appearance of the installation screen.

1. Select your model and language if prompted.
2. The process of installation or fixation varies from system to system.
3.If you don’t solve your problem. Then get a helping specialist.
4. We’re just one click away.
5. Call us on our list to find a solution instantly.
6. We think in customer satisfaction until a credible solution is obtained that we will not leave your problem in any scenario.
7. We’re making sure your issue is solved.
8. We’re here to help you, don’t worry.
9. You’re sitting down and relaxing.
10. The Brother Printer Support Number and our team will assist you with this to get a resolution of this contact.

EXTRAS: Connecting Brother Printer to Wireless Network

• Many clients are searching for wireless connectivity to my printer?
• Some say my brother printer is not going to link to my wireless router.
• They say I’ve tried a lot of different methods, but I can’t configure the Brother wireless network device.
• Some customers use Wireless Network Connection to install Brother Printer,  But they can’t. For the first time, many clients are setting up a Brother computer on a wireless (Wi-Fi) network.
• To connect the Brother computer to the wireless network, they need assistance.
• So, when our specialists are here to assist you 24* 7, you NEED NOT to WORRY.

The Meaning Behind the Brother “Printer Offline” Error Message

The “Printer Offline” error message is one of the most common errors received by Brother printer users. Though it can seem ominous, the error is not indicative of the end of days for your printer.

A printer typically shows an “offline” error message if it is experiencing a setting error, connectivity issue, or has outdated drivers or software. While all of these problems require different solutions, you can perform them efficiently and for free.

Simple Solutions for Getting Your Brother Printer Back Online

Our visitors are often faced with a similar predicament (and web search), “My Brother Printer keeps going offline.” If you’re in the same boat, here are some popular tips & tricks worth considering.

Physical Errors

It’s always best to start with the easiest solution first: checking your printer for any obvious physical malfunctions that would prevent it from printing. Ensure that all of your ink cartridges are properly installed and running smoothly and that your printer is not experiencing a paper jam.

If your printer is connected to the internet via an Ethernet cable, ensure that the Ethernet cable is properly connected to an active Ethernet port. Examine any cables and power cords to ensure they are all properly connected and in good working order. If your printer is connected to the computer via a cable, make sure that the cable is properly connected to both the printer and the computer.

Confirm that no errors are listed on the printer control panel. Possible errors that could prevent your printer from showing up as a viable printing option may include “Toner Empty,” “Paper Jam,” or “Low Ink.”

Verify that Both Devices are Powered up and Online

Make sure that both your computer and your printer are powered on. If your printer is connecting to your computer via WiFi, ensure that your computer and printer are connected to the same WiFi network. You can verify your Brother printer’s WiFi from the printer control panel.

If you are trying to print wirelessly (without using a cord to connect your printer to your computer), then both your computer and printer must be connected to the same active WiFi. If they are on different WiFi networks, they may not be able to communicate.

Restart the Computer and Printer

As simplistic as it sounds, this is a tried and true solution. Restarting your printer and computer can help refresh the components necessary for the two to communicate.

To restart your printer, turn the device off, unplug the power cord, and let the printer sit unplugged for at least 30 seconds. Plug the printer back in and turn the printer on. Reconnect the printer to the WiFi.

Set Your Default Printer

The default printer is the one that your computer will prioritize when choosing a printing device. If your default printer is not your Brother Printer, your computer may be ignoring it in favor of a different printer. Making your Brother printer the default printer will allow your computer to focus solely on that connection.

To manually set your printer as the default printer with Windows:

1- Click on the “Start” button on your computer and select “Control Panel” from the list.

2- In the window that appears, select “Devices and Printers” (or the equivalent menu option).

3- Select your printer from the resulting window, and then select “Open Queue.”

4- Under the “printer” drop-down, select “Set as Default Printer.”

To manually set your printer as the default printer with MacOS:

1- In the “Apple” menu, click “System Preferences” and select “Print & Scan.”

2- Click “Default Printer,” then select your printer as the default printer option.

Set Printer to Online Mode

If your printer is offline, there is a chance that it is your computer, not your printer, that is at fault. When this is the case, you can typically jumpstart the connection between your computer and printer by manually turning the printer to online mode on your computer.

To manually set your printer online with Windows:

1- Click on the “Start” button on your computer and select “Control Panel” from the list.

2- In the window that appears, select “Devices and Printers” (or the equivalent menu option).

3- Click on “Printer” on the top menu of the “Devices and Printers” window and select “Use Printer Online” in the drop-down menu.

To manually set your printer online with MacOS:

1- In the “Apple” menu, click “System Preferences” and select “Print & Scan.”

2- If a yellow light appears next to your printer’s name, double-click the icon for your printer. Click “Resume” from the window.

Cancel Current Print Jobs

If you’ve been trying to print, chances are you have at least one print job in your queue. When print jobs are queued, it can overwhelm the printer and computer as they are trying to connect. Canceling print jobs allows the printer and computer to focus solely on communicating.

To cancel print jobs on Windows:

1- Click on the “Start” button on your computer and select “Control Panel” from the list.

2- In the window that appears, select “Devices and Printers” (or the equivalent menu option).

3- Right-click on your printer’s icon and select “See What’s Printing.”

4- Right-click each print job and select “Cancel,” then click “Yes.”

To cancel print jobs on MacOS

1- In the “Apple” menu, click “System Preferences” and select “Print & Scan.”

2-  Click on your printer and select “Open Print Queue.”

3- Click on each print job and select “Delete.”

Advanced Solutions for Getting Your Brother Printer Back Online

If your printer is still offline after trying the solutions above, you may have a driver or software issue. To fix these issues, use the solutions below.

Check for Duplicates

Brother printers occasionally end up offline thanks to one of their largest flaws: the installation occasionally duplicates on the computer. This can happen when you connect the printer using a different USB port on your computer or if you have installed the same printer driver multiple times.

To solve this issue, you will need to remove the copies that are not working and set the initial install as your default printer:

To removed printer duplicates with Windows:

1- Click on the “Start” button on your computer and select “Control Panel” from the list.

2- In the window that appears, select “Devices and Printers” (or the equivalent menu option).

3- Look through your available devices and see if there are multiple printers with the same name (For example, “Brother HL-6180DW series” and “Brother HL-6180DW series (copy 2)”)

4- If there are multiple versions of your printer, hover your mouse over the first one until the printer status appears. If the printer status is “ready,” set this printer as your default option by right-clicking the icon and select “Set as Default Printer.”

5- For the duplicates that are not working properly, it is best to remove them from your device to avoid similar problems in the future.

To remove printer duplicates with MacOS:

1- In the “Apple” menu, click “System Preferences” and select “Print & Scan.”

2- Look through your available devices and see if there are multiple printers with the same name (For example, “Brother HL-6180DW series” and “Brother HL-6180DW series (copy 2)”)

3- If there are multiple versions of your printer, select the version with a green light next to it, indicating that it is online and available.

If you have a Brother printer with a model name that begins with “MFC-“ or “DCP-,“ you can use the provided CD to run an automatic uninstallation and reinstallation of your printer. Simply insert the CD into your computer and select “Repair MFL-Pro Suite” from the CD options.

Update Your Printer Driver

The printer driver is responsible for converting the item you are trying to print into a format that the printer can understand. These drivers are periodically updated by the manufacturer. If you have an older device, your printer driver may need to be updated to allow you to print. The driver may also need to be redownloaded if it is corrupted when the driver duplicates.

To download the newest driver for your printer:

1- Go to the Brother Driver Downloads

2- Enter your device model and click “Search.”

3- Click on the driver for your device.

4- Select your computer operating system and click “Okay.”

Once the driver is installed, it is typically best to remove and reinstall your printer software using the steps above to fix Brother Printer Says offline problem